|
|
|
65" America OneAn International America's Cup Class Radio Control Model
Yacht with spinnaker!
|
|
America One is an Americas' Cup type model yacht of impeccable quality and a Strict One Design. She is raced actively in Orlando ,Fl and with her fully gybable spinnaker offers a whole new racing experience in radio control. She is a joy to sail: steady as a rock and tracks as if on rails! She takes gusts in stride with no tendency to round up or go out of control like some some other models. Read some of our customer comments America One requires only one rig for all conditions due to her unique Wing Tip Rig™ which is easy to depower. Many other boats her size require two to three rigs for different conditions which can really run up the cost or limit your sailing if you don't have them. The spinnaker works very well in any condition since the stronger the wind the more it tends to LIFT the bow!!! You can actually set the spinnaker with the bow into the wind and use it to backup to get rid of weeds!! This boat is our Flagship America's Cup Class Yacht
model and is one we are very ,very proud of! |

65" Loa, 22 " Draft, 11.5" Beam, 25.8 lb Displacement,
2650 sq inches sail area all up!
The 18 lb keel is removed for transporting by unscrewing one nut.

This picture shows the America
One spinnaker trimmed parallel to
the mainsail.


The forward well drains overboard. All adjustments are on deck.
No need to open any hatches!
|
65" Loa, 11.5" Beam, 22" Draft, 25.8 lb Displacement |
|
|
18 lb keel ballast, 6.5 lb hull and equip.+ battery, 1.3 lb rig--25.8 lb all up |
|
|
1750 sq in main and jib, 900 sq in spinnaker, 2650 sq in all up. |
|
|
All hulls and decks are of carbon fiber, kevlar, and S-glass in various combinations and epoxy resin. |
|
|
No internal frames--"structural reinforcement, keel trunk, rudder tube, jib tube, spinnaker pole mounts, and spinnaker trough molded in". |
|
|
Removable keel by loosening one nut for transporting. |
|
|
88" carbon fiber mast. Carbon fiber main and jib booms. |
|
|
Features Garry Hoyt/Doug Lord patented spinnaker system. |
|
|
Symmetrical spinnaker and Wing Tip Rig™ are standard. |
|
|
This model was designed by Doug Lord, founder of microSAIL! |
|
|
Futaba 8uap radio. |
|
|
Only 5 channels are normally used. Open channels for options and customizing. |
|
|
One Guyatt SmartWinch is used for spinnaker hoisting and dousing. |
|
|
Whirlwind winch for Mainsail |
|
|
Strict one design America's Cup Class Yacht with manufacturer control of specifications and weight. |

Three 65" microSAIL!
America One's
with spinnakers available in 3 colors
The photo on the right shows how the spinnakers
can be carried with the
apparent wind forward of the beam!
America
One's race on Sundays at Lake Highland
in Orlando, FL.
Contact Doug Lord, 321-868-2091,
to verify times.
Order the VHS video
tape to see them racing. $12 ppd.
The price of videos is refunded with purchase of a model.
Call 321-868-2091 for fleet discounts on two or more ready-to-sail models
for racing.
|
Ready-to-sail America One |
|
|
Crew Mate Module |
|
|
Accessories |
| Complete kit includes
everything you need to complete the boat except paint and glue.
The hull and deck are bonded, the keel trunk, rudder tube, jib
boom tube, spinnaker pole tubes are all in place. You need to
fill and finish the hull/deck joint, install the servo module
mounts, spinnaker tube, mast compression tube, spinnaker end cap,
rudder and keel. The two halves of the lead bulb need to be glued
together, filled and sanded. Everything needs to be painted. You
will have to cut out the servo holes on the servo module, install
and rig servos and spinnaker winch and install deck fittings and
hatch. For proper functioning of the spinnaker system this boat
requires approximately 20 single blocks and 6 ball bearing thru
deck fittings. (included) Only Pekabe are strong enough for the
spinnaker system. The radio needs to be programmed and we emphasize
that the Futaba 8uap is the ONLY radio we have yet found with
the right combination of sticks and dials. Due to the carbon construction
a PCM radio is required.. The ONLY winch ,of all winches worldwide,
that will pull the spinnaker down is the Guyatt 380; he also makes
the special 3-pathway drum for that winch. The supplied mainsheet
winch is the Whirlwind Tensor and included with the kit is the
7.2v voltage regulator. The battery is a 7.2v ni-cad to give maximum
power to the spinnaker winch. The mast needs the mast heel and
crane added (included) and the boom needs to be finished , painted
and rigged. All sails are included. Instructions are provided
along with pictures and consultation as you need it.
Basic policies: 50% is due with order. The final payment is due two weeks before shipping. Delivery time varies with the level of completion and existing production workloads, but an estimated delivery time can be provided at time of purchase. Performance of our boats will be degraded and in some cases systems will not work if our equipment recommendations are not followed. Kits require an intermediate to expert level of competence especially in finishing. |
Purchase/shipping policy: a 50% down
payment should accompany order.
Delivery time varies, see above.
Balance must be paid 2 weeks prior to shipping.
| © 1999 - 2007 microSAIL! All Rights Reserved | Last Modified: 1/9/07 |